Transport And Moving - Husqvarna 420 Operator's Manual

Chassis and Blade Disc
1. Set the main switch in 0 position.
2. Wear protective gloves.
3. Lift the robotic lawnmower onto its side.
4. Clean the blade disc and chassis using e.g. a dish
brush.
Check at the same time that the skid plate rotates freely
in relation to the blade disc.
If long blades of grass or other objects find their way in,
these may impede the blade disc. Even a slight braking
effect leads to a higher consumption of energy and
longer mowing times, and at worst will prevent the robotic
lawnmower from being able to mow a large lawn. The
blade disc must be removed to carry out a more thorough
cleaning. If necessary, get in touch with your local dealer.
Chassis
Clean the underside of the chassis. Brush or wipe with a
damp cloth.
Wheels
Clean around the front wheels and rear wheels as well as
the front wheel suspension.
Body
Use a damp, soft sponge or cloth to clean the body. If
the body is very dirty it may be necessary to use a soap
solution or washing-up liquid.
Charging Station
Clean the charging station regularly from grass, leaves,
twigs and other objects that may impede docking.

8.5 Transport and Moving

Secure the machine during transport. It is important
that the robotic lawnmower is kept still when it is being
transported, for instance, between lawns.
The accompanying lithium ion batteries are covered by
demands in legislation concerning hazardous goods.
Special requirements on packaging and marking must be
followed for commercial transport with, for example, third
parties or carriers.
An expert in hazardous goods must be consulted before
preparing the transport of the subject. Any more detailed
national regulations must also be observed.
Cover over any open connectors and pack the battery in
such a way that it will not move in the packaging.
1157866-26,420,430X,450X,EN_160314.indd 77
MAINTENANCE
3012-1060
3012-272
3012-1067
3012-1068
3012-1069
English - 77
2016-03-14 17:00:00