Husqvarna 420 Operator's Manual page 64

Change the name of a Profile
Profile names can be changed so it is easier to remember
what settings have been saved in the respective profile.
• Select the Profile name to be changed
• Press OK
• Select Rename in the menu and press OK.
Move the cursor with the arrow keys. Press OK to
•
select a letter. Press BACK to save the new name.
• Profile names can be seen in the Settings - Profiles
menu. The name of the selected profile can also be
seen on the start page.
Use a Profile
Do the following to activate and use a profile and thereby
use the settings that have been saved.
• Mark the profile to activate.
• Press OK.
Select Select and press OK.
•
The robotic lawnmower will now use the settings that
were saved in the profile.
One Automower for several yards
®
The unique coupling between mower and charging station
is saved in the profiles. This allows up to three different
charging stations to be coupled to the same robotic
lawnmower.
Coupling a new charging station to the robotic
lawnmower:
• First save a profile to be used with the original
charging station.
• Then place the mower in the new charging station
being coupled to the mower.
• Select New loop signal, see 6.5 Security on page 47.
• Save a profile for the new charging station.
In order to use the robotic lawnmower in the original
charging station, the first profile must now be selected. In
order to use the robotic lawnmower in the new charging
station, the new profile must now be selected.
To give the best function, GPS assisted navigation should
be disabled for all extra installations and only be used for
the main installation. To turn off GPS assisted navigation,
see 6.8 Installation on page 51.
English - 62
1157866-26,420,430X,450X,EN_160314.indd 62
MENU FUNCTIONS
3012-575
3012-576
2016-03-14 16:59:45