Hitachi DV 14DSDL Service Manual page 9

(2) Mount the Shift Knob [49] and Shift Arm [22]
(Fig. 11).
Mount the Shift Arm [22] to the cylindrical
protrusions inside the Rear Case [21]. Insert
the cylindrical protrusions of the Rear Case
[21] into the holes of the Shift Arm [22] on both
sides. Confirm that the protrusions of the Shift
Arm [22] are properly inserted into the grooves
of the Slide Ring Gear [27]. Then secure the
Shift Arm [22] onto the Rear Case [21] by
using the Screw Set D2 x 3.5 (2 pcs.) [23].
Insert the Shift Arm [22] inversely into the
groove of the Shift Knob [49] by facing the
"High" indication on the Shift Knob [49].
CAUTION: The Shift Arm [22] has a
proper mounting direction.
(3) Mount the protrusions of the Click Spring [11] to the concave portions of the Front Case [10].
Fig. 12
Front Case [10]
Dial Holder (B) [6]
Front Case [10]
Wider concave portion
Nut [7]
Wider concave portion
Fig. 11
Shift Arm [22]
Left-handed
"High" indication
Screw Set D2 x 3.5 (2 pcs.) [23]
Click Spring [11]
B
B
B-B
Click Spring [11]
Wider protrusion
Wider protrusion
-8-
Screw Set M3 x 12 (4 pcs.) [24]
Shift Knob [49]
Groove of Slide Ring Gear [27]
Nut [7]
Protrusion
Dial Holder (B) [6]
Cover (A) [4]