Maintenance; Sound Pressure; Sound Power; Vibration - Toro 07252 Workman 1100 Operator's Manual

Hide thumbs Also See for 07252 Workman 1100:
Table of Contents

Advertisement

• Never overload your vehicle. The name plate (located
under dash on center column) shows load limits for the
vehicle. Never overload the attachments or exceed the
Gross Vehicle Weight (GVW).

Maintenance

• Only qualified and authorized personnel shall be
permitted to maintain, repair, adjust, or inspect the
vehicle.
• Before servicing or making adjustments to the machine,
stop the engine, set the parking brake, and remove the
key from the ignition to prevent someone from
accidentally starting the engine.
• To make sure that the entire machine is in good
condition, keep all nuts, bolts, and screws properly
tightened.
• To reduce the potential for fire, keep the engine area
free of excessive grease, grass, leaves, and
accumulation of dirt.
• Never use an open flame to check the level or leakage
of fuel or battery electrolyte.
• If the engine must be running to perform a maintenance
adjustment, keep your hands, feet, clothing, and any
parts of your body away from the engine and any
moving parts. Keep everyone away.
• Do not use open pans of fuel or flammable cleaning
fluids for cleaning parts.
• Do not adjust the ground speed governor. To ensure
safety and accuracy, have an Authorized Toro
Distributor check the ground speed.
• If major repairs are ever needed or assistance is
required, contact an Authorized Toro Distributor.
• To be sure of optimum performance and safety, always
purchase genuine Toro replacement parts and
accessories. Replacement parts and accessories made by
other manufacturers could be dangerous. Altering this
vehicle in any manner that may affect vehicle operation,
performance, durability, or its use, may result in injury
or death. Such use could void the product warranty.

Sound Pressure

This unit has a maximum sound pressure level at the
operator's ear of 78 dBA, based on measurements of
identical machines per Directive 98/37/EC.

Vibration

This unit does not exceed a hand/arm vibration level of
2
2.5 m/s
, based on measurements of identical machines per
Directive 98/37/EC.
This unit does not exceed a whole body vibration level of
2
0.5 m/s
, based on measurements of identical machines per
Directive 98/37/EC.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

07252tc workman 1100Workman 1100

Table of Contents