Installing Ce Decals; Product Overview; Controls - Toro 04358 Greensmaster 3150 Operator's Manual

6

Installing CE Decals

Parts needed for this procedure:
1 Warning decal (121–2641)
Procedure
If this machine will be used in the EU, affix the warning decal
121–2641 over warning decal (121–2640).

Product Overview

Controls

Brake Pedal
The brake pedal (Figure 11) actuates an automotive drum-type
mechanical brake located at each traction wheel.
Parking Brake Button
Pressing the brake pedal to actuate the brake assembly, then
pressing the small button indicated (Figure 11) will keep the
brakes actuated for parking. Disengage it by pressing the
brake pedal. Lock the parking brake before you leave the
machine.
1. Traction pedal
2. Brake pedal
Traction and Stopping Pedal
The traction pedal (Figure 11) has three functions: to make
the machine move forward, to move it backward, and to stop
the machine. Press the top of the pedal to move forward
and the bottom of the pedal to move backward or to assist
in stopping when moving forward. Also, allow the pedal
to move to the neutral position to stop the machine. For
operator comfort, do not rest the heel of your foot on reverse
when operating forward (Figure 12).
16
Figure 11
3. Parking brake button
Figure 12