Traction Pedal - Toro 03706 Operator's Manual

Backrest Knob
The backrest knob (Figure 4) adjusts backrest angle
from 5–20 degrees.
Suspension Knob
The suspension knob, located below the seat pan, allows
you to set the seat for the weight of the operator.
Note: The backrest and bottom seat cushions are
removable.
CAUTION
To ensure that the interlock switch operates
properly, set the seat suspension for the weight of
each operator. If the suspension is not set correctly,
the engine will run intermittently and tend to stall.
To correct this, set the suspension lighter.
Warning Light Test Button
Before operating machine, press the warning light test
button (Figure 5). All lights on the steering tower
should illuminate. Any light that does not come on
indicates an electrical malfunction that should be
repaired immediately. Oil pressure and electrical no
charge indicator lights illuminate when turning the key
switch On.
6
7
9 10 8
1. Warning light test button
2. Engine oil pressure
warning light
3. Fuel system warning
4. Coolant temperature
warning
5. Electrical no charge
warning
Hydraulic and Engine Indicator Lights
If these lights come on (Figure 5), stop the machine and
make repairs immediately.
2 4
3
5 1
Figure 5
6. Hydraulic oil temperature
warning
7. Hydraulic oil level warning
8. Hydraulic oil filter warning
9. Air cleaner warning
10. Alarm silence button
Engine Oil Pressure Warning
Dangerously low engine oil pressure is indicated by both
a warning indicator light and audible signal (Figure 5).
When this occurs, stop the engine immediately and
correct the problem.
Fuel System Warning
A warning indicator light and audible signal (Figure 5)
warn of excess water in the fuel system. Remove water
from the system.
Coolant Temperature Warning
If engine coolant temperature exceeds 221° F (105° C) a
warning indicator light (Figure 5) illuminates and audible
signal sounds. The engine shuts down if temperature
of coolant exceeds 230° F (110° C). Switch resets
automatically when system and engine cools down.
Electrical No Charge Warning
No charge to the batteries is indicated by a warning
indicator light and audible signal (Figure 5).
Hydraulic Oil Temperature Warning
A warning indicator light and audible signal warn
(Figure 5) of excessively high hydraulic temperature.
Hydraulic Oil Level Warning
A warning indicator light and audible signal (Figure 5)
warn of low hydraulic oil level. If oil level drops further,
the engine will automatically be stopped. Engine cannot
be restarted until oil supply is brought to a safe level.
Hydraulic Oil Filter Warning
A warning indicator light and audible signal (Figure 5)
G01228 7
warn of a clogged hydraulic filter.
Air Cleaner Warning
A warning indicator light and audible signal (Figure 5)
warn that the filter is clogged and in need of service.
Alarm Silence Button
Pressing button (Figure 5) silences alarm. Alarm system
will disengage and automatically reset when the problem
is corrected or the alarm silence button is pressed.

Traction Pedal

The traction pedal (Figure 6) controls forward and
reverse operation. Press the top of the pedal to move
13