Operating the Throttle
You can move the throttle control between F
positions
(Figure
15).
Always use the F
position when turning on the mower
AST
deck with the blade-control switch (PTO).
Operating the Ignition Switch
1. Turn the ignition key to the S
Note: When the engine starts, release the key.
Important: Do not engage the starter for more
than 5 seconds at a time. If the engine fails to
start, wait 15 seconds between attempts. Failure to
follow these instructions can burn out the starter
motor.
Note: You may need multiple attempts to start the
engine when you start it the first time after the fuel
system has been without fuel completely.
2. Turn the ignition key to the S
engine.
Using the Fuel-Shutoff Valve
The fuel-shutoff valve is located under the seat. Move the
seat forward to access it.
Close the fuel-shutoff valve for transport, maintenance, and
storage.
Ensure that the fuel-shutoff valve is open when starting the
engine.
and S
AST
G008946
Figure 15
position
(Figure
TART
G008947
Figure 16
position to stop the
TOP
LOW
1. On
Starting and Stopping the
16).
Engine
Starting the Engine
Important: Do not engage starter for more than 5
seconds at a time. If the engine fails to start allow a 15
second cool-down period between attempts. Failure to
follow these instructions can burn out the starter motor.
Note: You may need to attempt to start the engine multiple
times when you start it for the first time after the fuel system
has been without fuel completely.
19
1
2
G008948
Figure 17
2. Off