Assembly; Loose Parts; Installing The Valve Lever - Toro Dingo 320-D Operator's Manual

100-1692
1. Brake engaged
2. Parking brake
93-9084
1. Lift point

Assembly

Note: Determine the left and right side of the machine from the normal operating position.

Loose Parts

Note: Use the chart below to verify that all parts have been shipped.
DESCRIPTION
Traction Unit
Valve Lever
Key
Hydraulic oil filter

Installing the Valve Lever

1. Thread the lever into the speed selector valve
(Fig. 2).
Note: The lever should be installed with the bend toward
the operator.
2. Tighten the jam nut on the lever to lock it in position.
3. Brake disengaged
2. Tie-down point
QTY.
106-5976
1. Engine coolant under
pressure
2. Explosion hazard—read
the Operator's Manual.
1
Install valve lever
1
2 Start engine
1 Break-in oil change
1
Figure 2
1. Speed selector lever
9
3. Warning—do not touch the
hot surface.
4. Warning—read the
Operator's Manual.
USE
m–3883