Toro 31598 Operator's Manual page 21

Note: After you service the machine, reset the indicator.
Resetting the Service-Interval Indicator
1. Press and hold the far, right button on the InfoCenter.
Note: The Main Menu screen appears.
2. Select Service using the 2 buttons on the left; press the
button below the right arrow to continue.
3. Select Hours and press the button below the right
arrow.
4. Press the button below Reset Hours.
5. Select the Hours for the appropriate next service time
and press the button below the right arrow.
Note: A check mark appears once the indicator has
been reset.
6. When you are finished, press the button below the exit
icon (picture of an open door) to return to the main
screen, or press cancel to exit.
Engine Air Filter Restriction Indicator
This display indicates when the engine air filter is restricted
(Figure 16).
Figure 16
Alarm (InfoCenter)
The alarm on the Info Center sounds when the following
occurs:
•
It receives an engine fault.
•
It receives an advisory or fault from the TEC controllers.
•
You are starting the machine.
InfoCenter Fault Indicators
Stop the machine if the driver receives a Stop indication.
You should cease operating the machine and the engine as
quickly and as safely as possible to reduce damage to the
engine (Figure 17).
1. Fault screen
Check the engine if you receive a Check Engine indication
for a maintenance fault. You should take the machine to a
service center as soon as possible.
InfoCenter Advisories
The InfoCenter advisories provide additional information to
operate certain functions on the machine
g021 157
1. Advisory screen
21
Figure 17
Fault Example
(Figure
Figure 18
Advisory Example
18).