Fuel System Maintenance; Replacing The Fuel Filter; Servicing The Fuel Tank - Toro 74919TE Operator's Manual

Fuel System
Maintenance

Replacing the Fuel Filter

Service Interval: Every 500 hours/Yearly (whichever comes
first) (more often in dirty or dusty
conditions).
The fuel filter is located near the engine on the front or rear
side of the engine.
1. Disengage the PTO, move the motion-control levers to
the neutral-locked position, and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Allow the machine to cool down.
4. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
5. Close the fuel-shutoff valve under the seat
6. Squeeze the ends of the hose clamps together and slide
them away from the filter
3
G008963
Figure 61
1. Fuel filter
2. Hose clamp
7. Remove the filter from the fuel lines.
8. Install a new filter and move the hose clamps close to
the filter (Figure 61).
9. Open the fuel-shutoff valve.
Note: It is important to install the fuel line hoses and secure
them with plastic ties the same as they were originally installed
at the factory to keep the fuel line away from components
that could cause fuel line damage.
(Figure 18).
(Figure 61).
1 2
3. Fuel line

Servicing the Fuel Tank

Do not attempt to drain the fuel tank. Ensure that an
Authorized Service Dealer drains the fuel tank and services
any components of the fuel system.
43