Table Of Contents - Toro 08766 Operator's Manual

WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
This product complies with all relevant European directives.
For details, please see the Declaration of Incorporation (DOI)
at the back of this publication.
Introduction
The Sports Field Edger kit is mounted to a Sand Pro and
is intended to be used by professional, hired operators in
commercial applications. It is primarily designed to create a
clean-cut edge between grassy areas and unpaved barren areas.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. Figure 1
model and serial numbers on the product. Write the numbers
in the space provided.
© 2014-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
identifies the location of the
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
Contents
Safety ........................................................................... 3
Preparation............................................................. 3
Operation............................................................... 3
Maintenance ........................................................... 4
Safety and Instructional Decals ................................. 5
Setup ............................................................................ 6
1 Mounting the Cross Tube Assembly ........................ 7
2 Installing the Cutter Head Assembly ........................ 7
3 Installing the Hose Guide....................................... 8
2
Figure 1
(Figure
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
2),