Setup - Toro 08766 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
Media and Additional Parts
Description
Parts catalog
Operator's Manual
Certificate of conformity
Note: Determine the left and right sides of the machine
from the normal operating position.
Note: To operate the Sports Field Edger, the traction unit
must be equipped with the Rear Remote Hydraulics Kit,
Model 08781. If the serial number of the Rear Remote
Hydraulics Kit is prior to 310000001, you must update the
Rear Remote Hydraulics. Proceed to Step 1 in Setup.
Description
Cross tube assembly
Screw (3/8 x 3 inch)
Flat washer
Locknut (3/8 inch)
Cutter head assembly
Hitch pin
Hose guide
Flange nut
No parts required
No parts required
Qty.
1
4
4
4
1
1
1
1
–
–
Qty.
1 Use to reference part numbers
1 Read before operating the machine
1 Declaration of conformity
6
Use
Mount the cross tube assembly.
Install the cutter head assembly.
Install the hose guide.
Route the hydraulic hoses.
Check the hydraulic fluid.
Use