Before Operating
Figure 11
1.
Cut-off bar
INSTALL THE GRASS BASKET
1.
Grasp the basket by the top rear lip and slide it
onto the basket mounting rods (Fig. 12).
2.
When cutting in higher heights of cut, the bas-
ket may be lowered by removing each basket
mounting rod and re-installing on the opposite
side of the machine.
1
1.
Grass basket
2.
Basket mounting rod
CHECK INTERLOCK SWITCH
OPERATION
1.
Place the traction lever into the ENGAGE posi-
tion and the engine controls in STARTING
position.
2.
Try to start the engine. The engine should not
start. If it does, the interlock switch needs ser-
vice. Correct the problem before operating.
14
1
2
Fig. 12