Specifications - Toro 04060 Operator's Manual

Specifications

Engine: Kawasaki, air cooled, overhead valve, 4
cycle, 2.76 kW (3.7 hp), 2.36" x 1.73" bore and
stroke, 7.57 cu. in. (124 cc) displacement, 8.4:1 com-
pression ratio, 14.9 nM (11 ft. lbs.) @ 1400 rpm.
Electronic ignition, maximum noise suppression
muffler. 2.5 l (2.64 quart) fuel tank capacity.
Traction Drive: Engine to countershaft drive: two
"A" section V belts. Countershaft to differential
drive: 5 mm pitch timing belt. Differential to drum
drive: 8 mm pitch timing belt.
Differential: Peerless Series 100.
Transport Clutch: Belt idler
Brake: Band drum
Optional Transport Tires: Quick detachable,
3.00/3.25 x 6, 32.5 tread width.
Traction Drum: Dual cast aluminum, 19 cm diame-
ter.
Controls: Engine has recoil starter, ON/OFF switch
and choke. Handle has throttle lever, traction engage
lever and service/ park brake lever. The mower has
reel drive engage lever. Safety devices: neutral inter-
lock system.
Handle: Loop style, (2.5 cm) 1" diameter.
Reel Construction: 12.5 cm diameter, 11 carbon
steel blades welded to 5 stamped steel spiders.
Width of Cut: 66 cm
Height of Cut Range: 2.2–12.5mm
Clip: 40.6 cm
Reel Clutch: Jaw Type.
Bedknife and bedbar: Single edged high carbon
steel bedknife, induction hardened to Rc 48–55.
Fastened to machined, cast iron bedbar. Tournament
bedknife (Part No. 63-8560), standard.
Grass Basket: Molded polyethylene.
Dimensions:
Width: 91 cm
Height: 119 cm
Length: 150 cm
Dry Weight: 77.6 kg with basket and Wiehle
roller, without wheels or grooming reel.
9