Transporting Machines; Operating Tips - Toro 30695 Operator's Manual

1. Trailer
2. Full-width ramp

Transporting Machines

WARNING
Driving on the street or roadway without turn
signals, lights, reflective markings, or a slow
moving vehicle emblem is dangerous and can lead
to accidents causing personal injury.
Do not drive machine on a public street or roadway
without signs, lights, and/or markings required by
local regulations.
Use a heavy-duty trailer or truck to transport the machine.
Ensure that the trailer or truck has all necessary lighting and
marking as required by law. Please carefully read all the safety
instructions. Knowing this information could help you or
bystanders avoid injury.
To transport the machine:
•
Ensure that your vehicle, hitch, safety chains, and trailer
are adequate for the load you are pulling and that they
meet all local traffic regulations for your area.
•
Lock the brake and block the wheels.
•
Securely fasten the machine to the trailer or truck with
straps, chains, cable, or ropes as required by local traffic
regulations in your area
Figure 26
3. Not greater than
15 degrees
4. Full-width ramp—side
view
(Figure 27).
1. Front tie-down (left side
shown)

Operating Tips

Fast Throttle Setting/Ground Speed
To maintain enough power for the machine and deck while
mowing, operate the engine at the fast throttle position and
adjust your ground speed for conditions. A good rule to
follow is to decrease ground speed as the load on the cutting
blades increases; and increase ground speed as the load on the
blades decreases.
Mowing Direction
Alternate mowing direction to avoid making ruts in the turf
over time. This also helps disperse clippings, which enhances
decomposition and fertilization.
Cutting Speed
To improve cut quality, use a slower ground speed in certain
conditions.
27
1
G022097
Figure 27
2. Rear tie-downs