Servicing The Diesel Particulate Filter (Dpf); Servicing The Diesel Oxidation Catalyst (Doc) - Toro 30695 Operator's Manual

Traction unit
Hide thumbs Also See for 30695:
Table of Contents

Advertisement

Figure 32
1. Dipstick
4. If the oil level is low, remove the fill cap
and add oil until it is between the full and add marks.
Do not overfill.
5. Install the oil fill cap and dipstick.
6. Close the engine cover and secure it with the latches.
2. Oil fill cap
(Figure
32)
Changing the Engine Oil And Filter
Service Interval: Every 250 hours
Change the oil and filter every 250 hours.
1. Remove the engine oil drain plug
oil flow into a drain pan. When all the oil is drained,
install the drain plug.
2
1. Engine oil drain plug
2. Remove the oil filter
clean oil to the new filter seal before screwing it on.
Do not overtighten.
3. Add oil to the crankcase; refer to Checking the Engine
Oil.
Servicing the Diesel
Particulate Filter (DPF)
Service Interval: Every 3,000 hours (or as required)
For information on servicing the Diesel Particulate Filter
(DPF), refer to the service manual or contact your Toro
distributor.
Servicing the Diesel Oxidation
Catalyst (DOC)
Service Interval: Every 6,000 hours
For information on servicing the Diesel Oxidation Catalyst
(DOC), refer to the service manual or contact your Toro
distributor.
35
(Figure
33) and let the
g021890
1
Figure 33
2. Oil filter
(Figure
33). Apply a light coat of

Advertisement

Table of Contents
loading

This manual is also suitable for:

Groundsmaster 7210 series30633Groundsmaster 7210

Table of Contents