Navigation Characters; Keyboard; Power; System Setup - Sealey VS8801 Manual

2) EOBD cable -- Provides power to code reader and
communicates between code reader and vehicle.
3) USB cable -- Allows easy update via a PC and an internet
connection.

3.4 Navigation Characters

Characters used to help navigate the code reader are:
"#" -- Identifies the control module number from which data is
1)
retrieved.
2) "Pd" – Identifies a pending DTC when viewing DTCs.

3.5 Keyboard

No solvents such as alcohol are allowed to clean the keypad or display.
Use a mild nonabrasive detergent and a soft cotton cloth. Do not soak
the keypad as the keypad is not waterproof.

3.6 Power

The code reader is powered via the vehicle Data Link Connector (DLC).
Just follow the steps below to turn on the scan tool:
1) Locate DLC on vehicle.

A plastic DLC cover may be found for some vehicles and you
need to remove it before plugging the EOBD cable.
Plug the tool‟s EOBD cable to the vehicle‟s DLC.
2)

3.7 System Setup

The code reader allows you to make the following adjustments and
settings:
Language: Selects the desired language.
1)
2) Configure Monitors: Sets the monitors you want to test.
3) Unit of measure: Sets the unit of measure to English or Metric.
4) Key Beep Set: Turns on/off key-press beep.
Status Beep Set: Turns on/off the I/M Readiness Status beep.
5)
12