Sealey VS8801 Manual page 22

C. LED Test
The LED Test function verifies if the I/M Readiness LED indicator
lamps are functioning properly.
Use the SCROLL button to select LED Test from the Tool
1)
Self-test menu, and then press the ENTER/Exit button.
2) In the LED Self-test menu, use the SCROLL button to select
one or more LED lamps to check. The LED should turn on or
off according to the selected commands.
When completed, press the ENTER/Exit button to exit.
3)
Update Mode
This function allows you to update the code reader software and
DTC library through a computer.

To update your code reader, you need the following items.
The Code Reader VS8801
A PC or laptop with USB ports
A USB cable
1) Download the programs to be updated to your computer.
2) Run the MaxiLink Tool Kit in your computer. (Figure 3.11)
3) Connect the code reader to your computer through the USB cable
provided.
LED Self-test
RED LED ON
YELLOW LED ON
GREEN LED ON
Previous Menu
Figure 3.10
19
1/4