Viewing Vehicle Information - Sealey VS8801 Manual

4.6 Viewing Vehicle Information

The Vehicle Info. function enables retrieval of Vehicle
Identification
Calibration Verification Nos. (CVNs) and In-use Performance
Tracking on 2000 and newer vehicles that support Mode 9.
1) Use SCROLL button to select Vehicle Info. from the Diagnostic
Menu and press ENTER/Exit button. (Figure 4.3)
2) An advisory message comes up to remind you. Wait a few
seconds or press any key to continue.
3) Wait a few seconds while the code reader reads vehicle information.

If the vehicle does not support this mode, a message shows on
the display warning that the mode is not supported.
4) From Vehicle Info. Menu, use the SCROLL button to select an
available item to view and press the ENTER/Exit button.
No. (VIN),
Vehicle Info.
Turn key on
with engine off !
Press any key to con.
Figure 4.18
Vehicle Info.
Reading info...
- Please Wait -
Figure 4.19
39
Calibration ID Nos. (CINs),