NEC Express5800/R320a-E4 User Manual page 181

5. Select [Specify the file path to update], enter the directory in which the updated firmware
specified in the input box in step 1 is saved, and click the [Execute] button.
Perform the firmware update. The update result can be verified by the state in the [General]
screen for the target component (indication of "Firmware update completed").
TIPS: No state changes when the firmware is not correctly updated. Please confirm whether
the update file on the server is correctly stored in "/etc/opt/ft/BIOS.ROM".
6. After the BIOS for a single CPU module is completed, click the [Jump Switch] button.
The module completely updated is started and the active module is stopped.
7. Start the other module stopped.
Starting the module causes the firmware to be updated automatically.
However, if the [Enable automatic firmware update] property is invalid, update the module in
the procedure as 3 to 5.
Procedure in ft server utility
1. Save the image data of the update firmware in /etc/opt/ft/BIOS.ROM of the NEC
Express5800/ft series.
2. Select the target component in the [ft server] tree.
3. Check the current state of the target component with the LEDs. If the component is operating,
stop the component.
4. Select the <Update> for the target component.
Installing and Using Utilities 5-51