Cable Connection; Browser Control - NEC X551UHD Installation Manual

Hide thumbs Also See for X551UHD:
Table of Contents

Advertisement

X551UHD Installation Guide
55" LCD Display

Cable Connection

Communication Protocol:
Interface:
Communication System:
Baud Rate:
Data Length:
Parity:
Stop Bit
Communication Code:
Interface:
Communication System:
Communication Layer:
IP Address:
Port Number:

Browser Control

Information and control can also be available through the HTTP browser control menu.
In order to accomplish this, type: http://<the Monitor's IP address>/pd_index.html
Note that the LAN Power needs to be turned on in order for the display to be controlled while the units are off.
All displays are set to the IP address 192.168.0.10 out of the box
Communicating network PC needs to be on the same subnet as display that is being communicated with
Note: Above browser control states X841UHD but is consistent with the X551UHD.
www.necdisplay.com
RS-232C
Asynchronous
9600 bps
8 bits
None
1 bit
ASCII
Ethernet (CSMA/CD
TCP/IP (Internet Protocol Suite)
Transport layer (TCP)
192.168.0.10 (default out of box)
7142 (Fixed)
NEC Display Solutions of America, Inc.
Transmit Data+
Transmit Data-
Receive Data+
Not Used
Not Used
Receive Data-
Not Used
Not Used
X551UHD
Rev 1.0
Page 9 of 9

Advertisement

Table of Contents
loading

Table of Contents