Structure Of The Tray Setting Menu (Except For The Bypass Tray) - Sharp AR-C260P Operation Manual

Structure of the tray setting menu (except for the bypass tray)

"TRAY SETTING" is the first setting in "CUSTOM SETTINGS" (see page 2-18).
"TRAY SETTING" consists of the levels shown below.
To move through the settings on any level, press the [
To select a setting or store a selection for a setting, press the [OK] key.
To move back to the previous level after completing a setting or to cancel selection of a setting, press the [BACK/C]
key.
To correct an accidental selection, press the [BACK/C] key.
[OK]
TRAY SETTING
[BACK/C]
AUTO TRAY SWITCHING
PRINT LIST
TOTAL COUNT
CLOCK
Set the type of paper
loaded in the tray with
the or
• PLAIN
• LETTER HEAD
• PRE-PRINTED
• PRE-PUNCHED
• RECYCLED
• COLOUR
LEVEL1
[OK]
desired tray with the
or
[BACK/C]
] [ ] [
These settings are
] [ ] [
explained on page 2-17.
] [ ] [
LEVEL4
[OK]
• If the tray paper size
setting is "extra" and a
[BACK/C]
key.
standard size of paper
is loaded, select the
size with the
key.
• If the tray paper size
setting is "extra" and
an non-standard size
of paper is loaded
(see page 2-9), select
"EXTRA OK?" with
the
] key or [ ] key.
LEVEL2
[OK]
key.
[BACK/C]
LEVEL5
[OK]
or
[OK]
or key.
LOADING PAPER
LEVEL3
The currently set paper
size and paper type of
[BACK/C]
the selected tray
appear.
] [ ] [
[OK]
CHANGE TRAY X
SETTING OK?
LEVEL6
The selection is stored
and you return to level 2
Set the X dimension and
then the Y dimension of
the non-standard size
using the or key,
pressing the [OK] key
after each.
The selection is stored
and you return to level 2
2
2-11