Table of Contents
Advertisement
106-6764
1. To start the engine, move the traction pedal to Neutral,
press the brake pedal, move the throttle lever to Fast, turn
the ignition key to On, and then turn the ignition key to
Start; read the Operators Manual.
2. To stop the engine, move the throttle lever to slow,
disengage the PTO, set the parking brake, wait 5 minutes,
turn the ignition key to Stop, and remove the key; read the
Operators Manual.
3. Read the Operators Manual.
4. To engage the PTO, pull up on the PTO switch and move
it forward.
5. To disengage the PTO, move the PTO switch back.
6. To switch the transmission to high speed, raise the
attachment lift and switch the speed control to High.
1. Power Take-off (PTO)
2. Engage
3. Disengage
4. Transmission
5. High
106-2046
6. Low
7. Lock
8. Flow divider
9. Unlock
10. Cruise control (optional)
110-3286
1. Power outlet
2. Seat switch
3. Ignition switch
Battery Symbols
Some or all of these symbols are on your battery
1. Explosion hazard
2. No re, open ame, or
smoking.
3. Caustic liquid/chemical
burn hazard
4. Wear eye protection
5. Read the Operator's
Manual.
11. Silencer switch
12. Press the button
13. Key switch
14. Engine—preheat
15. Fast
12
4. Power Take Off (PTO)
5. Starter solenoid
6. Light Kit
6. Keep bystanders a safe
distance from the battery.
7. Wear eye protection;
explosive gases can cause
blindness and other injuries
8. Battery acid can cause
blindness or severe burns.
9. Flush eyes immediately
with water and get medical
help fast.
10. Contains lead; do not
discard.
16. Slow
17. Continuous variable setting
18. Engine coolant temperature
reset switch
Advertisement
Table of Contents
