Storeeasy Dashboard - HP StoreEasy 1000 Administrator's Manual

The left panel provides links to information about the following items:
Controller
Select a storage controller to view its type, status, firmware version, and serial number.
Physical Drives
This section provides an overview of all disk drives attached to the controller. Drives are
identified and grouped as assigned, unassigned, and spare drives. Each physical drive is
listed as a separate entry in the Storage System submenu. Select any of the physical drives
to display more information about the drive.
NOTE:
remains offline and its LEDs will remain off.
Logical Drives
A list of logical drives associated with the controller appears in the left panel tree view. Select
one of the logical volume entries to display the status of the volume, fault tolerance (RAID
level), and capacity (volume size). A link to the logical volume storage pool is also displayed.
Tape Drives
This section provides information about tape drives, if they are included.
Storage Boxes
This section provides an overview of the disk drives that are listed individually in the Physical
Drives section.
System
This section displays status for various system components.
Version Control
This section provides information about the Version Control Agent.
Operating system
This section provides information about the operating system storage volumes.
Software
This section provides information about system firmware and software.

StoreEasy Dashboard

This section provides troubleshooting steps for the StoreEasy Dashboard.
StoreEasy Dashboard does not launch or display data
To resolve this issue, perform the following steps:
Spare drives are only used when a disk drive fails. Until a spare drive is used, it
StoreEasy Dashboard 153