Nmi Functionality; Storeeasy 1850 Storage Hardware Components - HP StoreEasy 1000 Administrator's Manual

Hide thumbs Also See for StoreEasy 1000:
Table of Contents

Advertisement

Position
S7
S8
S9
S10
S11
S12
To access the redundant ROM, set S1, S5, and S6 to on.
When the system maintenance switch position 6 is set to the On position, the system is prepared
to erase all system configuration settings from both CMOS and NVRAM.
CAUTION:
properly configure the server, if not data loss could occur.
IMPORTANT:
HPE Dynamic Smart Array B140i Controller is disabled. Do not use the B140i controller when
the server is in Legacy BIOS Boot Mode. Do not change the BIOS from UEFI to Legacy BIOS
mode on the StoreEasy 1650 Expanded Storage system. The operating system M.2 SSDs are
connected to the B140i. The B140i is only accessible when the system is in UEFI mode.

NMI functionality

An NMI crash dump creates a crash dump log before resetting a system which is not responding.
Crash dump log analysis is an essential part of diagnosing reliability problems, such as failures
of operating systems, device drivers, and applications. Many crashes freeze a system, and the
only available action for administrators is to restart the system. Resetting the system erases any
information which could support problem analysis, but the NMI feature preserves that information
by performing a memory dump before a system reset.
To force the system to invoke the NMI handler and generate a crash dump log:
Use the iLO Virtual NMI feature.
Short the NMI header
For more information, see the HPE website http://www.hpe.com/support/NMI.

StoreEasy 1850 Storage hardware components

This section illustrates the components and LEDs located on the front and rear panels of the
StoreEasy 18x0 Storage.
Default
Off
Clearing CMOS or NVRAM or both deletes configuration information. Be sure to
Before using the S7 switch to change to Legacy BIOS Boot Mode, be sure the
("System board components" (page
Function
Off = Set default boot mode to UEFI.
On = Set default boot mode to legacy.
Reserved
Reserved
Reserved
Reserved
Reserved
18)).
Hardware components
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents