Mitsubishi Electric GOT2000 Series Connection Manual page 294

12.3 GOT Side Settings
12.3.1 Setting communication
interface

Controller setting
Set the channel of the equipment to be connected to
the GOT.
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting
12 - 4
12. PRINTER CONNECTION
12.3 GOT Side Settings
Click!
[Controller Setting] from the

Printer setting
3.
1.
Select [Common]
4.
from the menu.
2.
Select the printer type.
3.
Set the interface to which the printer is connected.
4.
When Serial is selected in Printer type, clicking the
detail setting button displays the Communication
Detail Settings dialog box for the communication
driver. Make the settings according to the usage
environment.
12.3.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
(1) Setting the communication interface
When Channel No.8 is used for the serial printer,
the following external devices, which use Channel
No.8, cannot be connected at the same time.
• Barcode reader that requires the power supply
When connecting the above-mentioned devices at
the same time, set the serial printer to Channels
No. 5 to 7.
(2) Setting for the driver
Regardless of the printer type, multiple printers
are cannot be set.
2.
3.
[Peripheral Setting]
4.
Click!
[Printer]