Mitsubishi Electric GOT2000 Series Connection Manual page 73


List of commands for formats 14, 15 (GOT-F900 series microcomputer connection)
Command
Command name
ASCII
Symbol
code
Batch read
0 30
H
(w/out station No.)
Batch read
A 41
H
(w/ station No.)
Batch write
1 31
H
(w/out station No.)
Batch write
B 42
H
(w/ station No.)
Multi-point write in bit
3 33
H
units (w/out station No.)
Multi-point write in bit
D 44
H
units (w/ station No.)
Fill command
4 34
H
(w/out station No.)
Fill command
E 45
H
(w/ station No.)
Set clock data
5 35
H
(w/out station No.)
Set clock data
46
F
H
(w/ station No.)
Read clock data
6 36
H
(w/out station No.)
Read clock data
G 47
H
(w/ station No.)
Description
Reads bit devices in byte units.
Reads word devices in byte units.
Reads bit devices in byte units.
Reads word devices in byte units.
Writes to bit devices in byte units.
Writes to word devices in byte units.
Writes to bit devices in byte units.
Writes to word devices in byte units.
Writes bit patterns (bit ON/OFF, inversion, direct specification) in
1-point units (8 bits for 1 point) to a specified device.
Writes the same value to a range of specified devices.
Sets the clock data of the GOT.
Reads the clock data of the GOT.
2. MICROCOMPUTER CONNECTION (SERIAL)
Max. number of points
processed
255bytes (2040 points)
255bytes (127 points)
255bytes (2040 points)
255bytes (127 points)
255bytes (2040 points)
255bytes (127 points)
255bytes (2040 points)
255bytes (127 points)
70bytes (560 points)
―
―
―
2.5 Message Formats
2
2 - 23