Table of Contents
Advertisement
22
Enclosure extension
The extension can be used for accommodating customer equipment; it is also
automatically added whenever required by factory-installed options such as
• switch fuse (always included with the enclosure extension)
• line contactor with Category 0 emergency stop devices (start/stop and emergency
stop switches included)
• thermistor relay(s)
• Pt100 relays
• top cable entry/exit
• additional I/O terminal block.
Type code
The type code contains information on the specifications and configuration of the
drive. The first digits from left express the basic configuration (e.g. ACS800-02-
0170-5). The optional selections are given thereafter, separated by + signs (e.g.
+E202). The main selections are described below. Not all selections are available for
all types. For more information, refer to ACS800 Ordering Information (EN code:
64556568, available on request).
Type code selections for the ACS800-02
Selection
Product series
Type
Size
Voltage range
(nominal rating in bold)
+ options
Construction
Resistor braking
Filter
Line options (+C111 or
+C127 required)
Cabinet options (+C111
+C127 required)
Cabling
The ACS800-02/U2
Alternatives
ACS800 product series
02
free standing. When no options are selected: 6-pulse diode input bridge, IP 21,
Control Panel CDP312R, no EMC filter, Standard Application Program, no enclosure
extension, cabling from below, boards without coating, one set of manuals.
Refer to Technical data:
IEC ratings
2
208/220/230/240 VAC
3
380/400/415 VAC
5
380/400/415/440/460/480/500 VAC
C111
enclosure extension (bottom entry/exit, switch fuse with gG fuses)
C127
US enclosure extension (US door interlock disconnect switch fuse, US gland/conduit
plate, all components UL/cUL approved)
D150
brake chopper
E202
EMC/RFI filter for first environment TN (grounded) system, restricted (the A limits)
E210
EMC/RFI filter for second environment TN/IT (grounded/ungrounded) system
E208
common mode filter
E209
light common mode filter
F250
line contactor
Q951
emergency stop of category 0
F260
ultrarapid line fuses (aR)
G304
115 VAC auxiliary voltage transformer
H351
top entry (+C111+H353 required)
H353
top exit (+C111+H351 required)
H358
US/UK gland/conduit plate
Advertisement
Table of Contents
