Memory Shift - Kenwood TH-D74A User Manual

3 Select [Clear Group] and press [A/B].
The clear group selection screen appears.
4 Select the group to clear.
5 Press [ENT].
Each press adds or removes a check mark.
6 Press [A/B].
The group clear confirmation screen appears.
• To end the operation without clearing the group, press
[MODE] to return to the previous screen.
7 Press [A/B].
The specified group is cleared. If check marks are
added to check boxes, multiple groups can be cleared
simultaneously.
Memory Group Names
A name can be assigned to each of the 30 memory groups.
You can assign a group name of up to 16 half-width
characters (or 8 full-width characters).
1 Access Menu No. 201.
The name edit group selection screen appears.
2 Select a group and press [A/B].
The group name input screen appears.
3 Edit the group name.
4 Press [ENT].
The memory group name is registered and the frequency
screen reappears.

MEMORY SHIFT

Shift the contents of a memory channel or CALL channel to
VFO.
Shifting Memory from the Frequency Screen
1 Press [MR] or [CALL] to enter Memory Recall mode or
CALL channel mode.
2 Recall your desired memory channel to shift to VFO. (This
step is not necessary when selecting the CALL channel.)
3 Press [F], [VFO].
The memory channel is copied to VFO.
• The entire contents of the Memory channel or CALL
channel are copied to the VFO, and VFO mode is
selected after the transfer is complete.
• When copying a transmit frequency from an odd-split
Memory or CALL channel, you must first turn the
Reverse function on before pressing [F], [VFO].
Shifting Memory from the Memory Channel List
1 Press [MR] to enter Memory Recall mode.
2 Press [ENT].
The memory channel list screen appears.
3 Select the memory channel to shift to VFO.
4 Press [MENU].
The memory channel list menu appears.
5 Select [Memory Shift (M>V)] and press [A/B].
The memory channel is copied to VFO and switches to
VFO mode.
Shifting Memory from the CALL channel List
1 Access Menu No. 204.
2 Select a CALL channel.
3 Press [MENU].
The CALL channel list menu appears.
4 Select [Memory Shift (M>V)].
5 Press [A/B].
The memory channel is copied to VFO.
8-5