Name And Functions Of Indications On Remote Controller - Toshiba RAS-13BKV-E Service Manual

DISPLAY LAMP BRIGHTNESS ADJUSTMENT
5.
To decrease the display lamp brightness or turn it off.
1. Press and hold
) is shown on remote controller display.
or
to rise or decrease the brightness in 4 levels.
2. Press
Remote control
LCD
Lamp illuminates full brightness.
Lamp illuminates 50% brightness.
Lamp illuminates 50% brightness and the operation lamp
is turned off.
All lamps are turned off.
● In the examples of
going off.

9-4-3. Name and Functions of Indications on Remote Controller

[Display]
All indications, except for the clock time indicator, are displayed by pressing the
1.
Transmission mark
This transmission mark
remote controller transmits signals to the indoor
unit.
2
. Mode indicator
Indicates the current operation mode.
(A : Auto, : Cool,
3
. Temperature indicator
Indicates the temperature setting.
(17°C to 30°C)
1
2
8
for 3 seconds until brightness level (
FAN
Operation display
and , the lamp illuminates for 5 seconds before
indicates when the
: Dry, : Fan only)
3
4
5
, ,
Brightness
100%
50%
50%
All turned off
4
. FAN speed indicator
Indicates the selected fan speed.
AUTO or five fan speed levels
(LOW
HIGH
Indicates AUTO when the operating mode is
either AUTO or
5
. OFF TIMER indicator
Indicates when the OFF timer is setting press the
OFF timer button and select off time by TEMP
botton after that back to press OFF timer again to
timer setting and push CLEAR button to stop the
operation.
6
. Hi-POWER indicator
6
Indicates when the Hi-POWER operation starts.
Press the Hi-POWER button to start and press it
again to stop the operation.
7
. ECO indicator
Indicates when the ECO is in activated.
Press the ECO button to start and press it again
to stop operation.
8
. A, B change indicator remote controller
When the remote controller switching function is
set, "B" appears in the remote controller display.
(When the remote controller setting is "A", there is
no indication at this position.)
9
. Swing
7
Press swing button to start the swing operation
and press it again to stop the swing operation.
- 46 -
FILE NO. SVM-16003-2
button.
, LOW + , MED
) can be shown.
: Dry.
, MED + ,