Siemens Gigaset A580 IP User Manual page 77

ECO DECT: Reducing the power consumption and transmission power of the base station
Activating/deactivating Eco mode / Eco mode+
¢
§Menu§
Eco mode / Eco mode+
Signal displays
Screen icon
Ð i Ñ Ò
| (flashes)
¼
Please note
u
With
station. You will hear the ringing tone if the base station can be reached.
The signal strength icon will be displayed.
u
When
call setup will be delayed by approx. 2 seconds.
handset standby time will be reduced by approx. 50%.
u
Registering handsets that do not support
be deactivated.
u
Activating
u
Eco mode
out, i.e. both functions cannot be used at the same time.
76
¢ ¢
Settings Base
Select and press
Signal strength:
– good to poor
– no signal
Eco mode+ enabled
A short while after the Eco mode+ is activated, the ¼
icon replaces the signal strength icon in the top left-
hand corner of the handset in idle display mode.
Eco mode+ enabled, dial a phone number to check access to the base
Eco mode+ is enabled:
reduces the range of the base station.
Eco mode
Eco mode+ and repeater support (
/
Additional Features
(‰ = on).
§OK§
Eco mode+
£
will cause the mode to
Page 94) cancel each other