NEC D3 Quick Start Manual page 23

5. From the Security Settings window under the
Security tab, highlight Trusted sites, and then
click Custom level.
6. In the Security Settings window, scroll down to
the Run ActiveX controls and plug-ins entry
and select Enable if it is not already selected,
and then click OK.
7. Start Internet Explorer and navigate to the
management server's network address and port
(default port 8070). If the server has an
associated DNS entry, navigate to that address
in the browser window. If the server is only
identified by an IP address, navigate to that
address and follow the prompts to install the
client software.
At this point, the software installation process
has been completed and you can manage the
array with the iSM client by navigating to the
management server address within the Web
browser.
Everything should be ready for the array to be
initialized and configured at this point. However,
if the Storage Manager fails to launch and
prompt for a user name and password, go back
through the configuration steps to ensure that
everything is correct.
NEC D3/D4 Quick Start Guide 21