NEC D3 Quick Start Manual page 27

8. After completing an initialization, an
initialization file can be generated and
used to configure other arrays or
reconfigure the existing array. This step
allows you to choose between using the
initialization wizard or a previously
generated installation file from another
array to configure this array.
During an initial setup of an array,
choose Use this wizard. Otherwise,
select Use an initialization file and type
the location of that file in the field below.
After the appropriate option has been
selected, click Next to continue.
9. At the Host Information Collection
window, you can select Automatic
collection as long as the application
servers to be configured have not been
configured for use with an array
previously, and as long as the Volume
List Command or ControlCommand
software has been installed on the
desired application server(s).
If these conditions have not been met,
the host information will have to be
gathered and typed in manually during
the initialization process.
After selecting or clearing the Automatic
collection field as appropriate, click Next
to continue.
10. If automatic collection was selected, an
initialization warning will appear to notify
you that the operating system on the
application server the array
automatically connects to can affect how
the array is configured during the
initialization process. If the array is being
installed in an environment other than
Windows, please refer to the array user
manual before continuing. Otherwise,
click OK to continue.
NEC D3/D4 Quick Start Guide 25