NEC D3 Quick Start Manual page 46

9. At the Select LD Binding Method window,
you can select between the following
options:
•
Specify only the number of LDs –
The current free capacity in the
selected pool will be divided among
the number of logical drives created.
•
Specify only the LD capacity – The
number of logical drives will be
determined by the pool capacity
divided by the chosen size of each
logical disk.
•
Specify both the number of LDs
and LD capacity – The number of
logical drives will be determined
manually but cannot exceed the
unassigned capacity of the selected
pool.
After the appropriate option has been
selected, click Next to continue.
10. Depending on which option was chosen
at the Select LD Binding Method window
in step 9, the window displayed next will
prompt for the number of logical disks,
the logical disk capacity, or both the
number and capacity of logical disks to
be created in the selected pool.
After the appropriate values have been
typed in, click Next to continue.
NEC D3/D4 Quick Start Guide 44