LG LDK24 ADSL Router User Manual page 37

At the DHCP: enable server page, configure the following information in the DHCP Server
Setup section.
In the Address Range subsection :
Use Default Range :
If checked, the DHCP server will calculate a range of IP addresses automatically. The range
will be updated if the LAN IP address is changed.
If not checked, you must enter Starting IP and Address Ending IP Address you want to use
directly.
Starting IP Address :
enter the first IP address in the pool of addresses.
Ending IP Address :
enter the last IP address in the pool of addresses.
Note : when you allocate the address range to provide the number of DHCP clients, you
should not exceed 30 DHCP clients. The maximum number of DHCP clients are 30. we
recommend that it should be better to assign around 20 DHCP clients. The number of DHCP
clients allocated do not affect Keyset operations such as ISDN and PSTN telephony service.
LDK24 ADSL Router User's Manual
Version 1.0D
<figure -DHCP server –2>
Copyright© 2002 LG Electronics Inc., LTD.
Page 37 of 67