Routed Configurations : Ipoa Routed Example; Connections Have Been Deleted. Refer To Figure-7; From The Left-Hand Menu, Click On Configuration>Ip Routes. If There Are Any Routes; Been Deleted. Refer To The Figure-8 - LG LDK24 ADSL Router User Manual

e. From the left-hand menu, click on Configuration>Save config. At the Save
configuration page, click on Save.
f. The ethernet devices are attached to the bridge, and the bridge is attached to the router
by default via the iplan IP interface. This will enable you to 'ping' devices that are
attached to any interface in the bridge.

Routed configurations : IPoA routed example

B.2.2
For this configuration, you need to attach the Ethernet device called ethernet to the router.
If you want to change default LAN IP address, refer to Annex C : Changing default LAN IP
address.
You can set "Routed configurations" by following instructions.
a. From the left-hand menu, click on Configuration>WAN connections.
Refer to the figure-5
b. The WAN connections page is displayed. If there are any connections listed, click on the
Delete hyperlink, then click on Delete this connection. Repeat until all WAN

connections have been deleted. Refer to figure-7

c. From the left-hand menu, click on Configuration>IP routes. If there are any routes
listed, check the Delete? checkbox and click on Apply. Repeat until all IP routes have

been deleted. Refer to the figure-8

d. From the Status page, click on the LAN Settings hyperlink or from the left-hand menu,
LDK24 ADSL Router User's Manual
Version 1.0D
<figure -usb2>
Copyright© 2002 LG Electronics Inc., LTD.
Page 57 of 67