Appendix B. Configuring Ldk24 Usb; Installing Pc Driver In Pc; Installing Usb Boot Device Driver - LG LDK24 ADSL Router User Manual

Note :
* Indicates the number of Max port when Nexer has no LSB8 board.
In any case of "with/without ADSLU", if you would use together with LSB8, 1 port of MPB and
1 port of LSB8 are used as stacking ports.

Appendix B. Configuring LDK24 USB

In addition to Ethernet port, LDK24 system provides USB port for web administrator to manage
LDK24 system.
B.1 Installing PC driver in PC
This Appendix describes how to install the PC driver on your Windows 98SE PC.
B.1.1 Installing USB Boot Device Driver
To install the USB driver that is used to support USB boot devices, follow the procedure below:
Power up the LDK24 System.
a.
Plug the USB cable from the LDK24 System into the USB port of the PC.
b.
The PC will detect the newly-attached device and display the Found New Hardware
c.
dialog box.
The Add New Hardware Wizard dialog box is then displayed to load the driver for the
d.
LDK24 ADSL Router User's Manual
Version 1.0D
<figure -LAN_SW-4>
Copyright© 2002 LG Electronics Inc., LTD.
Page 46 of 67