Modifying Engine Settings - Dell DL4000 User Manual

8. Click OK.
NOTE: You must restart the Core service for the changes to take effect.

Modifying engine settings

To modify the engine settings:
1. Navigate to the Core Console.
2. Click Configuration → Settings
3. In the Replay Engine Configuration pane, click Change.
The Replay Engine Configuration dialog box appears.
4. Enter the configuration information described as follows:
Text Box
IP address
Preferable Port
Port in use
Allow port auto-
assigning
Admin Group
Minimum Async
I/O Length
Receive Buffer
Size
Send Buffer Size
Read Timeout
Write Timeout
No Delay
5. Click OK.
28
Description
• To use the preferred IP address from your TCP/IP, click Automatically
Determined
• To manually enter an IP address, click Use a specific address.
Enter a port number or accept the default setting (8007 is the default port).
The port is used to specify the communication channel for the engine.
Represents the port that is in use for the Replay Engine configuration.
Click for allow for automatic TCP port assignment.
Enter a new name for the administration group. The default name is BUILTIN
\Administrators.
Enter a value or choose the default setting. It describes the minimum
asynchronous input/output length. The default setting is 65536.
Enter an inbound buffer size or accept the default setting. The default setting is
8192.
Enter an outbound buffer size or accept the default setting. The default setting
is 8192.
Enter a read timeout value or choose the default setting. The default setting is
00:00:30.
Enter a write timeout value or choose the default setting. The default setting is
00:00:30.
It is recommended that you leave this check box unchecked as doing
otherwise will impact network efficiency. If you determine that you need to
modify this setting, contact Dell Support for guidance.