Setting Replication Priority For An Agent; Canceling Operations On A Machine - Dell DL4000 User Manual

Outbound replication can be configured to a Managed Service Provider providing off-site backup and
disaster recovery service or to a self-managed core. To replicate agent data on a machine:
1. From the Core Console, click the Machines tab.
2. Select the machine that you want to replicate.
3. In the Actions drop-down menu, click Replication, and then complete one of the following options:
• If you are setting up replication, click Enable.
• If you already have an existing Replication set up, click Copy.
The Enable Replications dialog box appears.
4. In the Host text box, enter a host name.
5. Under Agents, select the machine that has the agent and data that you want to replicate.
6. If needed, select the check box Use a seed drive to perform initial transfer.
7. Click Add.
8. To pause or resume the replication, click Replication in the Actions drop-down menu, and then click
Pause or Resume as needed.

Setting replication priority for an agent

To set replication priority for an agent:
1. From the Core Console, select the protected machine for which you want to set replication priority,
and click the Configuration tab.
2. Click Select Transfer Settings, and then use the Priority drop-down list to select one of the
following options:
• Default
• Highest
• Lowest
• 1
• 2
• 3
• 4
NOTE: The default priority is 5. If one agent is given the priority 1, and another agent is given the
priority Highest, the agent with the Highest priority replicates before the agent with the 1
priority.
3. Click OK.

Canceling operations on a machine

You can cancel currently executing operations for a machine. You can specify to cancel just a current
snapshot or to cancel all current operations, which includes exports, replications, and so on.
To cancel operations on a machine:
1. From the Core Console, click the Machines tab.
2. Select the machine for which you want to cancel operations.
3. In the Actions drop-down menu, click Cancel, and then select one of the options described as
follows:
99