Dell DL4000 User Manual page 93

Text Box
Password
4. Click Connect to connect to this machine.
NOTE: If the Agent software is not yet installed on the machine that you designated, follow the
procedure Deploying The Agent Software When Protecting An
machine after deploying the Agent software, and then resume with the next step.
5. In the Protect dialog box, edit the settings as needed as described in the following table.
Field
Display Name
Repository
Encryption Key
Initially Pause
Protection
Volume Groups
6. Click Protect.
Description
The password used to connect to this machine.
Description
The host name or IP address you specified in the Connect dialog box appears
in this text field. Optionally, enter a new name for the machine to be displayed
in the Core Console.
NOTE: You can also change the display name later by accessing the
Configuration tab for an existing machine.
Select the repository on the Core in which to store the data from this machine.
Specify whether encryption is applied to the data for every volume on this
machine to be stored in the repository.
NOTE: The encryption settings for a repository are defined under the
Configuration tab in the Core Console.
After you add a machine for protection, AppAssure automatically begins taking
a base snapshot of data. You can select this check box to pause protection
initially. You then must force a snapshot manually when you are ready to start
protecting your data. For more information about manually forcing a snapshot,
see Forcing A Snapshot.
Under Volume Groups, you can define which volumes that you want to
protect and establish a protection schedule.
To set a default protection schedule of every 60 minutes for all volumes on the
machine, click Apply Default.
You can also select any volume on the machine and define protection
parameters for it individually.
Initial settings apply a default protection schedule of every 60 minutes. To
modify the schedule for any volume, click Edit for that volume. You can then
further define the interval between snapshots (including defining a separate
schedule for weekends) or specify a daily time to begin a snapshot.
For more information on editing the protection schedule for a selected
volume, see Creating Custom Schedules For
Agent. Restart the agent
Volumes.
93