Configuring Gts; Configuring Gts By Using The Mqc Approach - HP MSR4080 Configuration Manual

Step
4. Configure a
CAR-list-based CAR
policy on the interface.
Configuring ACL-based traffic policing
Step
1. Enter system view.
2. Enter interface view.
3. Configure an
ACL-based CAR
policy on the
interface.
Configuring traffic policing for all traffic
Step
1. Enter system view.
2. Enter interface view.
3. Configure a CAR
policy for all traffic on
the interface.

Configuring GTS

You can configure GTS by using either the MQC approach or non-MQC approach.

Configuring GTS by using the MQC approach

Step
1. Enter system view.
2. Create a class and
enter class view.
Command
qos car { inbound | outbound } carl
carl-index cir committed-information-rate [ cbs
committed-burst-size [ ebs excess-burst-size ] ]
[ pir peak-information-rate ] [ green action |
red action | yellow action ] *
Command
system-view
interface interface-type interface-number
qos car { inbound | outbound } acl [ ipv6 ]
acl-number cir committed-information-rate
[ cbs committed-burst-size [ ebs
excess-burst-size ] ] [ pir
peak-information-rate ] [ green action |
red action | yellow action ] *
Command
system-view
interface interface-type interface-number
qos car { inbound | outbound } any cir
committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ] [ pir
peak-information-rate ] [ green action |
red action | yellow action ] *
Command
system-view
traffic classifier classifier-name [ operator
{ and | or } ]
40
Remarks
By default, no CAR policy is
configured.
Remarks
N/A
N/A
By default, no CAR policy is
configured on an interface.
Remarks
N/A
N/A
By default, no CAR policy is
configured on an interface.
Remarks
N/A
By default, no class is created.