Step
5.
Return to cross-connect
group view.
6.
Return to system view.
7.
(Optional.) Enable the
ARP suppression push
function and set a push
interval.
Displaying and maintaining ARP suppression
Execute display commands in any view and reset commands in user view.
Task
Display ARP suppression entries (centralized
devices in standalone mode).
Display ARP suppression entries (distributed
devices in standalone mode/centralized devices
in IRF mode).
Display ARP suppression entries (distributed
devices in IRF mode).
Clear ARP suppression entries (centralized
devices in standalone mode).
Clear ARP suppression entries (distributed
devices in standalone mode/centralized devices
in IRF mode).
Clear ARP suppression entries (distributed
devices in IRF mode).
ARP suppression configuration example
Network requirements
As shown in
station can reach the L3VE interface VE-L3VPN 1 of Router B.
Enable ARP suppression on Router A to directly reply to ARP requests for Router B.
Figure 9 Network diagram
Command
quit
quit
arp suppression push interval
interval
Figure
9, the base station, Router A, and Router B are in an MPLS L2VPN. The base
Remarks
N/A
N/A
By default, the ARP suppression push
function is disabled.
Command
display arp suppression xconnect-group [ name
group-name ] [ count ]
display arp suppression xconnect-group [ name
group-name ] [ slot slot-number ] [ count ]
display arp suppression xconnect-group [ name
group-name ] [ chassis chassis-number slot
slot-number ] [ count ]
reset arp suppression xconnect-group
reset arp suppression xconnect-group [ name
group-name ] [ slot slot-number ]
reset arp suppression xconnect-group [ name
group-name ] [ chassis chassis-number slot
slot-number ]
21