Enabling Mpls Label Forwarding Statistics; Enabling Snmp Notifications For Mpls; Displaying And Maintaining Mpls - HP MSR2000 Configuration Manual

Enabling MPLS label forwarding statistics

MPLS label forwarding forwards a labeled packet based on its incoming label.
Perform this task to enable MPLS label forwarding statistics and MPLS statistics reading, so that you can
use the display mpls lsp verbose command to view MPLS label statistics.
To enable MPLS label forwarding statistics:
Step
1. Enter system view.
2. Enable
forwarding
specific LSPs.
3. Enable MPLS label statistics
reading, and specify the
reading interval.

Enabling SNMP notifications for MPLS

This feature enables MPLS to generate SNMP notifications. The generated SNMP notifications are sent to
the SNMP module.
For more information about SNMP notifications, see Network Management and Monitoring
Configuration Guide.
To enable SNMP notifications for MPLS:
Step
1. Enter system view.
2. Enable SNMP notifications
for MPLS.

Displaying and maintaining MPLS

Execute display commands in any view and reset commands in user view.
Task
Display MPLS interface information.
Display usage information for MPLS
labels.
Display LSP information.
Command
system-view
mpls statistics { all | [ vpn-instance
MPLS label
vpn-instance-name ] { ipv4
statistics for
ipv4-destination mask-length | ipv6
ipv6-destination prefix-length } | static
| te ingress-lsr-id tunnel-id }
mpls statistics interval interval
Command
system-view
snmp-agent trap enable mpls
Command
display mpls interface [ interface-type interface-number ]
display mpls label { label-value1 [ to label-value2 ] | all }
display mpls lsp [ egress | in-label label-value | ingress |
outgoing-interface interface-type interface-number | protocol { bgp
| ldp | local | rsvp-te | static | static-cr } | transit ] [ vpn-instance
vpn-instance-name ] [ ipv4-dest mask-length | ipv6 [ ipv6-dest
prefix-length ] ] [ verbose ]
10
Remarks
N/A
By default, MPLS label
forwarding statistics are disabled
for all LSPs.
By default, MPLS label statistics
reading is disabled.
Remarks
N/A
By default, SNMP notifications for
MPLS are enabled.