Crlsp Backup Configuration Example - HP MSR2000 Configuration Manual

Bypass Tunnel
Route Pinning
Retry Limit
Reoptimization
Backup Type
Auto Bandwidth
Min Bandwidth
Collected Bandwidth
# Execute the display mpls lsp verbose command on Router D to display detailed information about the
bidirectional MPLS TE tunnel.
[RouterD] display mpls lsp verbose
Destination
FEC
Protocol
LSR Type
Service
In-Label
State
Nexthop
Out-Interface: -
Destination
FEC
Protocol
LSR Type
Service
NHLFE ID
State
Out-Label
Nexthop
Out-Interface: GE2/1/1
Destination
FEC
Protocol
LSR Type
Service
NHLFE ID
State
Nexthop
Out-Interface: GE2/1/1

CRLSP backup configuration example

Network requirements
Router A, Router B, Router C, and Router D run IS-IS.
: -
: -
: -
: -
: -
: -
: -
: -
: 4.4.4.9
: 1.1.1.9/1/30478
: RSVP
: Egress
: -
: 3
: Active
: 127.0.0.1
: 4.4.4.9
: 1.1.1.9/1/30478
: RSVP
: Ingress
: -
: 1025
: Active
: 1150
: 30.1.1.1
: 30.1.1.1
: 30.1.1.1
: Local
: Ingress
: -
: 1024
: Active
: 30.1.1.1
Auto Created
Retry Interval
Reoptimization Freq
Backup LSP ID
Auto Bandwidth Freq
Max Bandwidth
111
: -
: -
: -
: -
: -
: -