Configuring Pw Redundancy; Configuring Static Pw Redundancy; Configuring Ldp Pw Redundancy - HP MSR2000 Configuration Manual

Configuring PW redundancy

This task includes the following configurations:
Create a backup PW for the primary PW.
•
Specify whether to switch traffic from the backup PW to the primary PW when the primary PW
•
recovers, and specify the wait time for the switchover.
Manually perform a PW switchover.
•

Configuring static PW redundancy

Step
1. Enter system view.
2. Enter cross-connect group
view.
3. Enter cross-connect view.
4. (Optional.) Specify whether to
switch traffic from the backup
PW to the primary PW when
the primary PW recovers, and
specify the wait time for the
switchover.
5. Enter cross-connect PW view.
6. Configure a backup
cross-connect PW and enter
backup cross-connect PW
view.
7. Return to user view.
8. Manually perform a PW
switchover.

Configuring LDP PW redundancy

Step
1. Enter system view.
2. Enter cross-connect group
view.
3. Enter cross-connect view.
4. (Optional.) Specify whether to
switch traffic from the backup
PW to the primary PW when
the primary PW recovers, and
specify the wait time for the
switchover.
Command
system-view
xconnect-group group-name
connection connection-name
revertive { wtr wtr-time | never }
peer ip-address pw-id pw-id
[ in-label label-value out-label
label-value ] [ pw-class class-name
| tunnel-policy tunnel-policy-name ]
*
backup-peer ip-address pw-id
pw-id in-label label-value out-label
label-value [ pw-class class-name |
tunnel-policy tunnel-policy-name ] *
return
l2vpn switchover peer ip-address
pw-id pw-id
Command
system-view
xconnect-group group-name
connection connection-name
revertive { wtr wtr-time | never }
388
Remarks
N/A
N/A
N/A
By default, traffic is immediately
switched back from the backup
PW to the primary PW when the
primary PW recovers.
N/A
By default, no backup PW is
configured.
N/A
N/A
Remarks
N/A
N/A
N/A
By default, traffic is immediately
switched back from the backup
PW to the primary PW when the
primary PW recovers.