HP MSR2000 Configuration Manual page 206

Step
5. Configure filtering of received
routes.
6. Advertise community attributes
to a peer or peer group.
7. Allow the local AS number to
appear in the
attribute of routes received from
the peer, and set the maximum
number of repetitions.
8. Filter routes received from or
advertised to a peer or peer
group based on an AS_PATH
list.
Advertise a default VPN route
9.
to a peer or peer group.
10. Apply an ACL to filter routes
received from or advertised to
a peer or peer group.
11. Save all route updates from a
peer or peer group.
12. Specify the router as the next
hop of routes sent to a peer or
peer group.
13. Configure BGP to not change
the next hop of routes sent to an
EBGP peer or peer group.
14. Specify a preferred value for
routes received from a peer or
peer group.
15. Apply a prefix list to filter routes
received from or advertised to
a peer or peer group.
Command
filter-policy { acl-number |
prefix-list prefix-list-name } import
peer { group-name | ip-address }
advertise-community
AS_PATH
peer { group-name | ip-address }
allow-as-loop [ number ]
peer { group-name | ip-address }
as-path-acl aspath-filter-number
{ import | export }
peer { group-name | ip-address }
default-route-advertise
vpn-instance vpn-instance-name
peer { group-name | ip-address }
filter-policy acl-number { export |
import }
peer { group-name | ip-address }
keep-all-routes
peer { group-name | ip-address }
next-hop-local
peer { group-name | ip-address }
next-hop-invariable
peer { group-name | ip-address }
preferred-value value
peer { group-name | ip-address }
prefix-list prefix-list-name { export
| import }
197
Remarks
Optional.
By default, BGP does not filter
received routes.
Optional.
By default, no community attributes
are advertised to any peer or peer
group.
By default, BGP discards route
updates that contain the local AS
number.
Optional.
By default, no AS filtering list is
applied to a peer or peer group.
Optional.
By default, no default VPN route is
advertised to a peer or peer group.
Optional.
By default, no ACL-based filtering
is configured.
By default, BGP does not save
route updates from any peer.
By default, the router sets itself as
the next hop for routes sent to a
peer or peer group.
Optional.
By default, the router sets itself as
the next hop for routes sent to an
EBGP peer or peer group.
In an inter-AS option C network
where an RR is used to advertise
VPNv4 routes, configure this
command on the RR so the RR does
not change the next hop of routes
sent to EBGP peers and clients.
Optional.
By default, the preferred value is 0.
By default, no prefix list based
filtering is configured.