Ldp Configuration Examples; Ldp Lsp Configuration Example - HP MSR2000 Configuration Manual

Task
Display LDP discovery information
(MSR4000).
Display LDP FEC-label mapping
information (MSR2000/MSR3000).
Display LDP FEC-label mapping
information (MSR4000).
Display LDP-IGP synchronization
information.
Display LDP interface information.
Display LDP LSP information.
Display LDP running parameters.
Display LDP peer and session
information (MSR2000/MSR3000).
Display LDP peer and session
information (MSR4000).
Display LDP summary information
(MSR2000/MSR3000).
Display LDP summary information
(MSR4000).

LDP configuration examples

LDP LSP configuration example

Network requirements
Router A, Router B, and Router C all support MPLS.
Configure LDP to establish LSPs between Router A and Router C, so subnets 1 1.1.1.0/24 and 21.1.1.0/24
can reach each other over MPLS.
Configure LDP to establish LSPs for only destinations 1.1.1.9/32, 2.2.2.9/32, 3.3.3.9/32, 1 1.1.1.0/24,
and 21.1.1.0/24 on Router A, Router B, and Router C.
Command
display mpls ldp discovery [ vpn-instance vpn-instance-name ]
[ interface interface-type interface-number | peer peer-lsr-id |
targeted-peer peer-lsr-id ] [ verbose ] [ standby slot slot-number ]
display mpls ldp fec [ vpn-instance vpn-instance-name ]
[ destination-address mask-length | summary ]
display mpls ldp fec [ vpn-instance vpn-instance-name ]
[ destination-address mask-length | summary ] [ standby slot
slot-number ]
display mpls ldp igp sync [ interface interface-type
interface-number ]
display mpls ldp interface [ vpn-instance vpn-instance-name ]
[ interface-type interface-number ]
display mpls ldp lsp [ vpn-instance vpn-instance-name ]
[ destination-address mask-length ]
display mpls ldp parameter [ vpn-instance vpn-instance-name ]
display mpls ldp peer [ vpn-instance vpn-instance-name ]
[ peer-lsr-id ] [ verbose ]
display mpls ldp peer [ vpn-instance vpn-instance-name ]
[ peer-lsr-id ] [ verbose ] [ standby slot slot-number ]
display mpls ldp summary [ all | vpn-instance vpn-instance-name ]
display mpls ldp summary [ all | vpn-instance vpn-instance-name ]
[ standby slot slot-number ]
37