HP MSR2000 Configuration Manual page 331

Step
2. Configure an IPv6 static
route for an IPv6 VPN
instance.
3. (Optional.)
the default preference for
IPv6 static routes.
Configuring RIPng between an MCE and a PE
Step
1. Enter system view.
2. Create a RIPng process for an
IPv6 VPN instance and enter
RIPng view.
3. Redistribute VPN routes.
4. (Optional.)
default
redistributed routes.
5. Return to system view.
6. Enter interface view.
7. Enable the RIPng process on
the interface.
Configuring OSPFv3 between an MCE and a PE
Step
1. Enter system view.
2. Create an OSPFv3 process for
an IPv6 VPN instance and
enter OSPFv3 view.
Set the router ID.
3.
4. Redistribute VPN routes.
Command
ipv6 route-static vpn-instance s-vpn-instance-name
ipv6-address prefix-length { interface-type
interface-number [ next-hop-address ] | nexthop-address
[ public ] | vpn-instance d-vpn-instance-name
nexthop-address } [ permanent ] [ preference
preference-value ] [ tag tag-value ] [ description
description-text ]
Configure
ipv6 route-static default-preference
default-preference-value
Command
system-view
ripng [ process-id ] vpn-instance
vpn-instance-name
import-route protocol [ process-id ]
[ allow-ibgp ] [ allow-direct | cost
cost | route-policy
route-policy-name ] *
Configure the
cost value for
default cost value
quit
interface interface-type
interface-number
ripng process-id enable
Command
system-view
ospfv3 [ process-id | vpn-instance
vpn-instance-name ] *
router-id router-id
import-route protocol [ process-id
| all-processes | allow-ibgp ]
[ allow-direct | cost cost |
route-policy route-policy-name |
type type ] *
322
Remarks
By default, no IPv6
static route is
configured.
The default value is
60.
Remarks
N/A
N/A
By default, no routes are
redistributed into RIPng.
The default value is 0.
N/A
N/A
By default, RIPng is disabled on an
interface.
Remarks
N/A
N/A
N/A
By default, no routes are
redistributed into OSPFv3.