Ldp Gr - HP MSR2000 Configuration Manual

LDP GR

LDP Graceful Restart enables an LSR to retain MPLS forwarding entries during an LDP restart, ensuring
continuous MPLS forwarding.
Figure 12 LDP GR
As shown in
GR restarter—An LSR that performs GR. It must be GR-capable.
•
GR helper—A neighbor LSR that helps the GR restarter to complete GR.
•
The device can act as a GR restarter or a GR helper.
Figure 13 LDP GR operation
GR restarter
Protocol
restarts
MPLS
forwarding state
holding time
As shown in
1. LSRs establish an LDP session. The L flag of the Fault Tolerance TLV in their Initialization messages
is set to 1 to indicate that they support LDP GR.
2. When LDP restarts, the GR restarter starts the MPLS Forwarding State Holding timer, and marks the
MPLS forwarding entries as stale. When the GR helper detects that the LDP session to the GR
restarter goes down, it marks the FEC-label mappings learned from the session as stale and starts
the Reconnect timer received from the GR restarter.
Figure 12, GR defines the following roles:
Set up an LDP session, and identify that
they are LDP GR capable
Re-establish the LDP session
Send label mappings
Figure 13, LDP GR works in the following steps:
GR helper
Reconnect time
LDP recovery time
20