Enabling Ipv6 Multicast Forwarding Between Sub-Vlans Of A Super Vlan - HP MSR1002-4 Configuration Manual

Step
1. Enter system view.
2. Configure
multicast
entry.
To configure a static IPv6 multicast MAC address entry in interface view:
Step
1. Enter system view.
2. Enter
interface
aggregate interface view.
3. Configure
multicast
entry.
Enabling IPv6 multicast forwarding between sub-VLANs of a
super VLAN
A super VLAN is associated with multiple sub-VLANs. Sub-VLANs are isolated with each other at
Layer 2. For information about the super VLAN and sub-VLANs, see Layer 2—LAN Switching
Configuration Guide.
To enable IPv6 multicast forwarding between sub-VLANs that are associated with a super VLAN:
Step
1. Enter system view.
2. Enter VLAN interface view.
3. Enable
forwarding
sub-VLANs
associated with a super
VLAN.
4. Delete all IPv6 multicast
forwarding entries with super
VLAN
incoming interface.
Command
system-view
a static IPv6
mac-address
MAC address
mac-address
interface-list vlan vlan-id
Command
system-view
Layer 2 Ethernet
interface
or Layer 2
interface-number
a static IPv6
mac-address
MAC address
mac-address vlan vlan-id
Command
system-view
interface
interface-number
IPv6 multicast
between
ipv6
that are
supervlan community
reset
[
vpn-instance-name
forwarding-table
{
[
interface as the
ipv6-group-address
[
incoming-interface
{
interface-number } } * | all }
multicast
interface
interface-type
multicast
vlan-interface
multicast forwarding
ipv6 multicast
vpn-instance
{ ipv6-source-address
prefix-length ]
prefix-length ]
interface-type
291
Remarks
N/A
By default, no
multicast MAC address entries
exist.
Remarks
N/A
N/A
By default, no
multicast MAC address entries
exist.
Remarks
N/A
N/A
By default, IPv6 multicast data
cannot be forwarded
sub-VLANs that are associated
with a super VLAN.
]
| N/A
|
static IPv6
static IPv6
among